Ideal Standard – Dual Flush Pmatic Outlet Valve, EV98167 (Replacement for SV93467), Multi-Colour, 1.5"

I have had to replace all 3 of the mechanisms in my toilets with different bits over the years, and these have solved the issues right out of the box. From replacing the diaphragm for the buttons to the main outlet sealing rings as they all leak and fail over time.The problem with the original part, original replacement parts and other white plastic copy replacements with black sealing rings is the rubber is hard and after about 6 months they begin to leak again. slowly passing and constantly draining the cistern.This Black plastic one has a soft white silicon sealing ring and sealed immediately. took a few attempts at pumping the the buttons to get it to plush on one press.Between the Original and other parts and copies, this is by far the best and most straight forward direct replacement that hasn't been over priced junk

Excellent, sorted out the problem

Easy to fit with just a slight twist, just check that the height from the cistern bottom to max water line on yours is 16cm, if it's 18cm you need EV98267.Cures dribbling toilet or non responsive push buttons.

On first installing the unit I had the problem of water constantly running into the toilet from the cistern. This wasn’t the original problem I’d bought the valve to fix.On speaking to Ideal Standard customer services the assistant advised me to make sure the value was primed by filling the blue hopper with water once it was clipped in place. This gives the main valve weight which ensures a good seal.Once done the running water stopped and the cistern filled properly and the new valve works perfectly.It’s a pity the installation notes that come with the new unit tell you everything to do to install, apart from priming the valve.

Properly packaged to avoid breakage.Easy to fit in minutes.

Perfect fit replacement, easy to change without the need to strip out the cistern.

I have ordered many of these over the years, and have never had a issue, but of my last two, which were recently delivered, one came of poor quality , the plastic housing that sits around the blue float is badly made and not uniform, so when i opened the package the item was apart, and also one of the two pins which lock the item into place, when inserted into the cistern these are the only parts which hold it in place, since one side is broken, it will not force a good seal, meaning the water is trickling into the toilet bowel.

Good and easy to fit.