Allewie Queen Size Platform Bed Frame with Fabric Upholstered Headboard and Wooden Slats Support, Fully Upholstered Mattress Foundation/No Box Spring Needed/Easy Assembly, Dark Grey

Very easy to follow step by step directions. Tools included with all the bolts nicely package and labeled. The frame itself was package really well, nothing damaged. Each piece was labeled to match the directions. I was able to put this together on my own. The metal parts seem pretty heavy duty no weak and bendable. Upholstery seems thick and durable. The slats are thicker than most I have seen they velcro to the bed frame and the velcro is stapled to the slats and bed frame not glued which I was happy about. There was no strong smell it has a normal new product smell but it is light and no awful. Overall I am happy about my purchase.

I had to order this bed after my very expensive bed broke suddenly and they told me that it would take 6 weeks from the factory to replace it.Not bad at all for the priceIt will do for the next six weeks. Instructions were easy to follow took me about four hours to break down and remove the old bed then build this one out of the box. I imagine that things would have gone faster if it wasn’t just me doing it, but that’s all useful because it proves only one person can put this bed together

1. It's smaller and shorter than I was hoping for. It's made for a mattress only really, not to be used with box springs.2. I knew I would not be using their cross bars, legs, and slats. I just wanted the color and basically the box.3. I installed it on my existing metal frame I have from Costco. The internal rail on this thing was a 1x1" piece of wood, screwed on with 4-5 drywall screws and two cute 90 degree brass colored brackets underneath each of the four side rail sections. I had an old bedframe break off at that spot while rough housing on the bed with my kids before so no faith in this set up.My install - I drilled holes through the 90 degree angle iron on my existing bedframe, used #12 - 3/4 inch zinc sheet metal screws to screw the side rails onto the frame. I took off the end brackets for the side rails at the head of the bed since it was too short to reach, then flipped around the ones by the footboard, switched sides so I could use #12 - 1 inch sheet metal screws (I like the flat bottom of the heads and the broadness of the head since I use washers with the screws) and screw the brackets onto the end of the footboard. I bought 6" natural colored round legs on Amazon and installed them about where the crsppy plastic feet were supposed to go, to raise the height of the footboard and side rails to cover more of my box spring. The head board I didn't use any of their hardware to connect it to the head of the metal bedframe, I used #12 - 7/8" zinc sheet metal screws with washers, to get the headboard about six inches higher. I bought two anti-shake bumper things for beds on Amazon to support the headboard from hitting the wall, or flexing and breaking when my wife leans on the headboard in bed reading.Sorry, I'll try to add pics later.

Got this bed frame for my mother who was on a budget after my father passed away, and wanted to redecorate the main bedroom to her individual taste. We didn't have very high expectations given the price point, but we were pleasantly surprised because we didn't find anything obviously wrong with the bed. It's not very heavy and pretty easy to assemble. The best part is it looks more expensive than it is. I would recommend this if you're on a budget and need something that looks modern. Just don't expect to pass this down to your kids because I'm not sure it'll last that long.

Overall a good looking bed. Frame is pretty sturdy. The velvet probably has something on it to preserve it and so it smells a little weird when you take it out the plastic but that’s to be expected and plus the smell went away pretty quickly with good air circulation. Unless you’re used to lifting heavy things, you should definitely have help with the box. Would 100% recommend this to anyone looking for a nice, budget friendly bed.

on my queen the noise level it does not make no noise because my room has all carpet so it does not make no squeaky noise or nothing. My room is perfect. It is always in my room is meant to be there. The build quality was very easy. The social was very clear. It had everything on. It was very organized for me to build so it was pretty easy. The color to the frame is exactly how it says right there is very soft and it’s Perfect. The screw quality was easy. The alignment was pretty easy to and the weight. It was not even that heavy it’s perfect. It’s perfect. The only thing is that it’s also small as the furniture that I purchased too so but it was comfortable like I said for a teenager for kids. It’s pretty beautiful for a small room so I do recommend to buy this frame.

This bed frame is a great buy! It looks sleek and modern with its soft black velvet upholstery, and it feels very sturdy. Assembly was easy, took me under an hour with clear instructions and well-labeled parts. The wooden slats support the mattress well, and there’s no need for a box spring. Highly recommend if you want a stylish upgrade without the hassle!

For those of you wondering, like i did; it does infact have enough slat coverage to support a mattress without a box spring. The thing was fairly easy to put together. The only part that caught me off guard, was the backboard. It's split into three pieces that you have to squeeze with the force of a dying star to get close enough to put the screw in. Other than that, quality product. Came as ordered, really nice color, fabric is fairly soft and it feels very sturdy (it'd better be 🤦‍♂️).