Qiumi Smart Wifi Thermostat for individual Gas/Water Boiler Heating Works with Amazon Alexa Google Home IFTTT Dry Contact,5A 95~240V AC

This is the second Qiumi Smart Wifi Thermostat i have bought. The first I bought about 4 years ago and still working fine. This second one was for my father in law.So easy to instal and set up, it was done in 15 minutes once its connected to the app that’s it. Alexa found it no problem and he can now operate the thermostat with his phone or his voice.The seller was very helpful on how to wire it up, but its very easy just 3 wires and a live to the switch.We did have a problem with the first one we received as the temperature setting kept lowering by itself. However the seller sent a replacement one out no problem and that is fitted and working perfectly.5 stars for a great product at a reasonable price and fantastic customer service.

Not bad at all this thermostat. Instructions could be a bit clearer but once you have got past the install it's really quite simple to use and set up.I installed this into a gloworm flexicom combi boiler and it works a treat.Installed from scratch as I had no thermostat just a controller.You need 4 wires.. live and neutral to feed power and then 2 more for the voltage free (24v) connection on the boiler.I haven't used any of the more expensive branded wifi thermostats so cant compare it to those but I am very happy.The app works well, once you have it on your phone you hardly go near the actual thermostat.

I ordered one and was so pleased I ordered another. These were as replacements for my WarmUp thermostats as I wanted then linked into my Alexa. Perfect solution as easy to fit - they are basically the same form factor and depth as the WarmUps - so it was a matter of swapping the power and sensor leads and powering on. I already had SmartLife which located them easily and then Alexa immediately recognised them. The instructions are very clear and cover most situations.My units were white and sit low profile to the wall. They are easy to operate with a clear display which shows all the information easily. Its also great to be able to see information on the floor temp, room temp and if the heating is on or not. All is also available in the SmartLife App.Great item and highly recommend. Would not hesitate to buy another.

This product is not compatible Alexa / Google Home for its app My BecaSmart is not recognized by Alexa or Google Home. I had to use another app (I used TuyaSmart) to have this thermostat recognized by Alexa/Google Home. I have a lot of smart devices in my house and I was lucky to find out that the TuyaSmart worked with this thermostat. It is not perfect though. I can turn it on/off by voice command and check the temperature in the room but I can't change the temperature through Alexa or Google Home. For that, I have to use TuyaSmart on my phone or directly go on the thermostat settings.

The thermostat works perfectly. I'm very happy with the quality and it's performance.Installation was easy. I'm not an electrician but I found it easy to install myself, and it took about 5-10 minutes to install, from removing the old heatmiser prt-ts thermostat and putting in the new one.I didn't need to change the back box the thermostat fits into, because I just used what was already there.However, the screws that came with the thermostat are to big and didn't fit the holes on the back box.That wasn't a problem because I used the screws from the old thermostate that I removed.The wifi was easy to setup and works well. I can turn the central heating on and off from my Samsung Galaxy Note 4. I can also control the temperature from my phone and turn the radiators on or off, when I'm away from home.When I'm away from home. I use my phone to switch the radioators on. By the time I get home. My flat is lovely and warm.The seller was a pleasure to do business with. He answered all of my questions before I made the purchase.He even agreed to change the backlight on the thermostat to blue.If you notice in his ad, there are no blue backlights on the thermostats.He said he would change mine and there was no extra charge.I recommend the product from this seller 100%. Because I'm using. It works as it should and it looks great on my wall.Plus it's smaller than my heatmiser thermostat and does not stick out from the wall as much.I have a Worcester combi boiler with water running through the radiators.If you have a gas boiler with water running through your radiators. The correct thermostat you need is 3A for boiler heating wifi.To be able to control the heating from your phone. The thermostat must be in manual mode.Then you can just turn it on anytime wherever you are, in or out of your home, and it will switch on or off from your phone.You can even switch it on before getting up for work, without leaving your bed when it's cold.Go ahead and buy one. You will love it.P.SThe two little green bits at the top right of the edge of the LCD screen, is from the film that protects the screen.I left the film on it so the screen doesn't get scratched when its wiped with a cloth.I noticed a previous customer mentioned they scratched their screen when cleaning it. I don't know what they used to scratch it.So this is why I left the film on mine. Besides. You can not see the film on the screen.The only reason why there's still a little bit of the green lef on the film, is because the blade on the stanley knife I used was blunt.Anyway, I'm happy with it. So enjoy your thermotstat when you get it.If you ever have to reset your broadband and find that your thermostat no longer syncs with your phone. Here's what to do.1. Switch off the power to your thermostat. Usually when you turn off the power to the boiler it will turn off the power to the thermostat. This must be a mains switch that turns off the power to the boiler and not the on off button on the boiler.2 Press and hold the down arrow on the thermostat until the screen starts flashing quickly with the wifi symbol top right. If you see a different symbol appear bottom right. Remove your finger and press and hold the down arrow button again until the wifi symbol appears top right. Should take no longer than 15-20 seconds.3. Switch the wifi on your smartphone on and make sure you are using the internet from your home and not your phones internet. The thermostat and phone must be on the same wifi connection.4. Ensure your wifi is using 2.4ghz5. You should already have the thermostat app on your phone. If not download it from the play store. Using your smartphone go into the app and add a device.6. The app may ask you to login. If it does log in, then add device and then click the green button that says, confirm indicator rapidly blink.7. Type in the name of your wifi and the password. Then click on the green button or next or continue. It should start scanning to find your thermostat.8. When it finds your thermostat your phone will be connected to control your thermostat either through the wifi in your home or your phones internet.This is what I did to get my phone to reconnect to the thermostat.

Amazon please remove this product.it is not safe at all.It blew up my boiler fuse twice.Last occasion it blew itself.only solace, it didn’t cause any fire or damage to the boiler or any breaker.

Hi, if you know what you are doing, this is easy to install for a combi boiler. Use the Ls and Ns sends.. then, a jumper wire on the back of the thermostat from live to the first switch port, the second is your Lr return. Very quick to setup, I use the smart life app to sync to Alexa. I use Alexa routines to set my timings and can ask Alexa to put the heating on from anywhere. Much cheaper option that some brands. Also, I have a routine on my alexa, when I say goodbye, it says good bye and turns off all my enables devices around including the heating.Warning, this device is DEEP. You need a 35mm deep box at a minimum, which means if you surface mount it, it will stick out a lot! Also, the screws supplied are too big for UK socket boxes. Lucky I had some sitting around, else you'd need to buy some.I would install this for friends if they asked, very cheap and easy to use and the app is pukka.