ARCTIC MX-6 (2 g) - Ultimate Performance Thermal Paste for CPU, Consoles, Graphics Cards, laptops, Very high Thermal Conductivity, Long Durability, Non-Conductive, Non-capacitive

My gaming laptop was lagging a lot and CPU temp was very high. This paste helped quite a bit and it has been running well for 1 year now.

Ultimate thermal solution for your PC or GPU

I purchased the 2gms variant for ₹580, which is significantly pricier than in nearby local market, but I had no choice due to availability. The paste is extremely thick, almost like soft clay, making it difficult to spread and requires patience. That said, it did lower my CPU/GPU temps by 5-8°C, though I expected more.The quantity is enough for 2 applications on laptop's CPU & GPU both, but only 1 application in case of desktop PC.In hindsight, Cooler Master Cryofuse 5, which I used 1.5 years ago, offered similar results and remained pasty upon recent replacement, all at nearly half the price for double the quantity. Arctic MX-6 is only worth considering if the 4gms or higher variant is available at a similar or comparable price.

I had bought a second hand laptop and the temperature was going above 94°C for CPU while gaming then i replaced my thermal paste with this one and the highest it goes now is 80°C and remains around 74-77 most of the time. Make sure to change thermal pads as well.

Great Temperature Drops both on CPU and GPU for my HP Omen 16 compared to factory thermal paste. Used thermal grizzly cryonaut previously on another older Omen 15. Similar performance for a lower price.

Got it for gaming laptop GPU and CPU. It works great. Thick consistency means will last a long time and not pump out. If it works for laptop then definitely will work for PC. If it doesn't work for you check the application and pressure between die and heat sink.Will update if any issues, so far so good.

I used it to repaste my laptop and found the thermals improved in the same margins as of the results i got from the previous TG kryonaut application. It's a bit more thick than kryonaut and to make things worse there is no spatula provided for spreading, i tried using a plastic card to spread it, but it was too sticky and overall difficult to manage. So i did it the X method application and the results were satisfactory as mentioned before.My purchase was 2g of mx6 for ₹630 sold by scorpzon and delivered by Amazon. The product came in an Amazon envelope cover, so beware of any transit damages as i found the protection inadequate. My syringe had even acquired a little bend/curve from the transit mishandling and pressure. I also verified the product with artic website (by qr code on product) and found out it's authentic product.

I don't see much difference I changed the factory thermal paste with mx6. The temperature point is same as before. Also the quantity feels to be insufficient , start with cpu gpu and other vram chips..I really feel it's a marketing gimik ...other brands also available on low price with same specifications..will update more...in my case my laptop nw aged 1 year so for a safety purpose I changed the paste as it reach 100 degree on performance mode...else around 60 degree to 90 degree on default mode...even after changing it...I hvn same temperature zones..