Feature Simple operation, directly for your quick return dent. Free paint repair, do not destroy the original paint, fast and environmentally friendly. Different sizes of traction pads, suitable for all sizes of dent. Suitable for car surface sheet metal, refrigerator, washing machine surface sheet metal. Suitable for a variety of flat metal concave place to use. HOW TO USE 1.Clean the dent part with a clean damp cloth. 2.Load the glue sticks in the glue gun,Pull the trigger so that the glue stick enters the glue gun.Plug in the power supply, let the glue gun preheat for 5 minutes. 3.choose a suitable traction gasket (large dent need to use a large traction gasket; Note: the greater the traction pad, the greater the pulling pull); 4.Pull the trigger,Apply the hot melt to the traction pad (the four holes of the gasket are also filled with hot melt); 5.Cover the traction gasket on the central part of the dent,then press it gently untill the hot melt curing sticky (about 8 minutes,less than 10 minutes); 6.Use the Bridge Puller to adjust the dent part of the surface with the surrounding flush. 7.Repeat the above steps several times. 8.If there are bumbs: First, rub the bumps with the thumb until the raised points are as flat as the other surfaces; If there is no effect, tap the bumps with the Dent Removal Pen until the bumps are fla. May need to be repeated several times (Note: when using the hammer, can not be too hard) 9. Remove the Dent Repair Tools. Package Include 1 x 20w glue gun 1 x bridge puller 4 x glue tabs 9 x glue stickes 1 x bottle 1 x plastic scraper 1 x Dent Removal Pen
Trustpilot
1 month ago
1 week ago
