COMINHKPR96442 Stainless Wort Chiller with Garden Hose Fittings, 1/2" x 50', Silver (AZ-W1250-SG)

Couldn’t get female fitting to seal, and replacement was sent that solved the problem.Cools five gallons of wort to 70 in fifteen minutes from 160

Okay…. Not what they meant when they sold it or designed it. But it works great for hot water. Water was 50 degrees and got to steaming hot in about 20 minutes for 15gallons. Such a nice shower 😂

The flare nut on the male side seeped even after tightening. The female side does not seat correctly. Seems to be a cheap inferior hose fitting. Returned, will try again as I really need this to work.

We use these in our glass polishing shop. We recirculate a polishing slurry and the slurry heats up over time due to friction. We have these inside a container where the slurry flows to and from. We have a chill water system that keeps the coils cool and in exchange, cools the slurry. These work great for what I need them for.

This wert chiller significantly reduced the time it took to get my brew day moving forward. Construction was solid, no leaks. The coil was a bit high for my brew pot batch. I brew 5 gal batches and some of the coil is not covered by the wert during the boil for sterilization. I could have gone with the shorter coil and would if i were to repurchase. However, this chiller works great. I knocked off one star because the coil isn't straight - sort of like the leaning tower of Piza!

immersion cooler setup directly for hose, but the fittings are brass not s.s.

Very Happy with this SS product. Making spacers to improve Wort flow between. Perhaps that could be an optional extra.

Such a nice chiller. Us to use a good home made copper one but the copper was a pain. SS works amazing and cleaning is so so much simpler then copper. 10g batch from 212* down to 75* in no time at all.