VBSI3214PR Window, 32" x 14", White

I wish I could give this 10 stars.. I searched and searched for weeks to find a window this size that was good quality. This not only looks great but also got outstanding reviews from my contractor! It’s solid, easily installed, and looks amazing. It’s worth every single penny and more. I’m so happy with this window!!!

Great basement window. Replaced the old awning style steel framed/1/4" thk glass windows that were embedded into the concrete from 1950s. I needed to chisel/pry old frame out but wasn't that bad. These windows are excellent for the price and are efficient if installed properly. Be sure to use spray foam specifically for windows and doors due to expansion rate. You do not want to use a high expanding spray foam. Throughly caulk inside and outside joint and you'll be happy. I needed a hammer drill for my application along with plenty of plastic shims for leveling. It's been over 2 years, four installed with mid 90s in summer/ low teens in winter and has been great no leaks 👍. Weep slots always go at the bottom of the sill**Updated with 4in dryer exhaust vent retrofit. I removed the slider and set aside as spare. Used prefinished white 1/16 alum sheet (azm/HD) with #7x1/2" hwh screws. Careful not to puncture anything beside the rpvc frame. Did this outside and inside and sandwiched tightly fit insulation board in cavity between both alum sheets. Be sure to use plenty of silicone around the dryer vent components, the perimeter of the alum sheet to frame and all fastener heads. At the very end of installation I applied privacy film as these are on ground level. Still let's in great light.2024 update: it's been 4yrs having these windows and everything has been great and performing as expected. No breach in the perimeter glazing seals (no condensation, fogging, streaking etc.)Solid product and well made!

Good price

Good windows. The slide part is very loose. I got 2 broken windows. Not sure if I should order a 3rd one. The packaging is terrible and the waiting time for placement is annoying. Has you can see there is no protection in the box at all. It is almost impossible it does brake.

Our windows in our basement were in desperate need of replacing. Our house is not new and our basement is just concrete walls/floor. The old windows were the aluminum frame style. I was able to leave the metal frame surrounding the concrete opening, all I had to do was remove the plastic spacers underneath the screws in the new windows. I put them in, pre-drilled the holes for the screws and screwed them in with concrete anchor screws. Then I used door/window expanding foam to fill the gaps and afterwards, I sealed the windows with window caulk/sealant. These windows do a great job of keeping out the cold/heat. They open, close, and lock with ease. They look great and we have two more windows in the basement we will be replacing with this same style. I recommend the following tools if you have a similar job to mine: 1/4" Concrete Anchor Screws 2 inches long, Door/Window expanding foam (the white stuff at Home Depot is best), Door/Window Sealant/caulk, and hammer drill, masonry drill bits, a good contractor's break-away knife/razor, and a razor blade for cleaning up anything that gets on the glass. The windows did not take much time to install.

My daughter installed our Basement Windows.We are very satisfied and happy!

Worked perfect for my daughters room. We had turned part of our basement into a room for her and it need an extra window. this is the perfect size. Was easy to install as well

This is a very good quality replacement for an original window. The size was perfect and it was an easy replacement. The window looks very good both inside and outside. After the installation the window opens and closes with no issues.