DRAGONSAT Compression F Connector Professional for CT63 WF65 Shotgun Twin Sky coax Satellite Cable 10 PACK - as used by the leading Uk Satellite Company

Excellent product

Great fittings very easy to use as long as you have the cutting & compression tools.

Good product but would be helpful if the seller put a proper link on so you can buy the tool at the same time or better still do the connectors and the tool as a kit

Look no further for the correct connectors for SKY "Shotgun" Cable. I have a SKYQ system.I felt the need to write a review as I've read that many people have had problems after purchasing this type of connector.You can use a cable stripper or Stanley knife to make off the cable before adding the connector. The pack comes with easy to follow instructions if required.You will need a compression tool to fit the connector. One tip I can give (see photos) is that when you look at your sky box from above, make the left hand side cable slightly shorter than the right before fitting the connector....this makes the connectors easier to connect/screw in to the back of your sky box. In all honesty I should have made the right hand cable slightly shorter but I didn't want to waste another connector. Also my cable has HT63 written on it, rather than CT63 or WF65. If your cable has HT63 then these are what you need! Hope this helps and clears up any issues you might have had?!

Looks like a quality conection for a sky cable but after receiving them I looked online for how to fit them and a special crimping tool is required. I only wanted to fit two and so buying a tool just for one job was a letdown.

These are the best plugs I have used in some time, and I’ve used a few. Easy to fit, tight connection. Great value from this seller.

I was looking for some new connectors for the sky twin cable installed in my house. It was a webro bskyb twin 63-008a cable and after reading some reviews it sounded like these wouldn’t work. I thought I’d try these and just any compression tool and they worked great. You have to ensure that you strip the cable properly and push it right in before you compress it, but if you do you get a great result.Hope this helps someone else.

Did exactly what I needed, I have skyQ so the twin cables are slimmer than normal. These connectors looked the exact same as the ones used already to connect my sky, but they are non reusable and I wanted to disconnect mine to relocate the cable, to do this I had to cut off the existing connectors, was really easy to do I used the compression tool recommended to buy with these. Only downside is I only needed two out of the whole pack so was costly for just two but still cheaper that the £70 call out from sky! And I now have spares if I need to do it again.I had never done this before either I just watched YouTubeDefinitely recommend